The RP Pond Reactor is an inline chemical filter for use on all pond and some commercial systems. They contain the renowned premium grade RP Aquatics ammonia pods, it helps keep ponds safe, making it great for new set ups, preventing and removing ammonia spikes, and will give you peace of mind when away on holiday. These are designed as a post-filter, the last media before re-entering the water and is particularly good in ponds with lots of (too many) or large fish and on commercial systems where stocks levels can dramatically vary. Highly recommended for Koi ponds.

Complete with:

6 x ammonia pods.
7 x separation sponges.

Installation:

Must be installed vertically for optimum performance.
Water can flow up or down to suit.

Pipe work: inlet and outlet are 58mm outside diameter, compatible with 50mm (2”) and 63mm (2½”) flexible PVC couplings/rubber boots.
10 screws for attaching brackets to location.
Overall dimensions: 70x16x16cm (packaging 70x20x20cm).

Usage:

• Change ammonia pods after 12 weeks.
• Other RP Aquatics pods (nitrate, phosphate, carbon) also fit inside the reactor.
• Maximum flow rate: 15,000lph (slower is more effective).
• Suitable for fresh and saltwater.
• Recommended for water volumes up to 60,000 litres.
• Regular water testing is recommended.

Can be used on the following filter configurations:

• Pump-fed
• Gravity-fed
• Pressurised
• Skimmer installations
• Stand-alone (pre-filter required)

Ideal for:

• Koi ponds
• Quarantine facilities
• Fish farms
• Commercial stock systems (growing on, wholesale & retail).

Tips:

• Separation sponges can be used alone for water polishing,
• Can be installed in a bypass configuration with valves to isolate unit or manage the flow rate (great on larger set ups).