Important Notice Due To Covid-19 - Please be aware there may be some delays with delivery orders - Collection Only At Present For Koi
Filtra Pond Sieve 4
Filtra Pond Sieve 4
£ 795.00
Order in the next Hours Mins and Seconds,
To get your item delivered on Friday

The Filtra Pond Sieve 4 is a pre-filter which is used to remove coarse waste particles (such as leaves, algae particles, food residue, etc.) from pond water before it can enter the biological cycle. This will reduce the work load for the bacteria in the biological filter.

It is best to connect the Kinshi High-Tech Sieves to 1 skimmer and 1 bottom drain. The water enters the filter through two tubes with a 110-mm diameter. From here, the water flows over the stainless-steel sieve. The sieve contains holes which range in size from 300 microns to 200 microns (sufficient to allow water through yet prevent waste from getting through). The water comes into the inflow chamber, where the pump can pump it back into the pond or the biological filter. The water supply may be interrupted using a valve so that the sieve may be cleaned. The waste may be rinsed out of the system using a minimum amount of water. The outlet for the waste may also be connected to a sewer system.


  • Very compact unit
  • Sieves water without blocking up
  • Adaptable for any system
  • All solids are taken directly out of the water
  • Prevents anaerobic situations
  • Volume independent floating capacity
  • Economical way to remove solids
  • Easy to clean and maintain


To put on top of multi-bay filters

  • Pump capacity: 20 000 litres / hour
  • Dimensions: 50 x 47 x 60 cm
  • Water inlet: 1 x 63mm(2”)
  • Water outlet: 1 x 110 mm
  • Waste outflow plug: 1½” (50 mm) including ball valve
  • Sieve 445 x 400 mm
  • 300 microns
  • Standard lid on the sieve

Colour: Sahara
Material: Polypropylene

Related Products
Customer Reviews (0)