G4 Pond Sealer - Clear
G4 Pond Sealer - Clear
£29.95
This G4 Pond Sealant Clear is an effective sealer for concrete ponds.G4 is a moisture cured, one component polyureethane product which forms a non-porous, tough, durable but flexible seal on concrete. This prevents lime leaching into your pond from the concrete and stops water leaking out.You just p...

This G4 Pond Sealant Clear is an effective sealer for concrete ponds.

G4 is a moisture cured, one component polyureethane product which forms a non-porous, tough, durable but flexible seal on concrete. This prevents lime leaching into your pond from the concrete and stops water leaking out.

You just paint it straight onto the concrete, no primer needed.

G4 can also be used to coat flagstones, waterfalls, statues and other concrete products to make them safe for the pond.

G4 Pond Sealer is available in G4 clear translucent finish or in Green and Black.

  • Deep bonding plastic coating
  • Seals out lime
  • Consumption varies depending upon porosity
  • G4 Clear requires 3 coats
  • G4 Coloured requires 2 coats of clear followed by 2 coats of coloured.

G4-Clear. Normally three coats of G4 clear is sufficient to build a continuous surface film but on very porous substrates a 4th coat may be required.

Application:

3 coats= 550grams/metre square.(for three coats)

This G4 Pond Sealant Clear is an effective sealer for concrete ponds.

G4 is a moisture cured, one component polyureethane product which forms a non-porous, tough, durable but flexible seal on concrete. This prevents lime leaching into your pond from the concrete and stops water leaking out.

You just paint it straight onto the concrete, no primer needed.

G4 can also be used to coat flagstones, waterfalls, statues and other concrete products to make them safe for the pond.

G4 Pond Sealer is available in G4 clear translucent finish or in Green and Black.

  • Deep bonding plastic coating
  • Seals out lime
  • Consumption varies depending upon porosity
  • G4 Clear requires 3 coats
  • G4 Coloured requires 2 coats of clear followed by 2 coats of coloured.

G4-Clear. Normally three coats of G4 clear is sufficient to build a continuous surface film but on very porous substrates a 4th coat may be required.

Application:

3 coats= 550grams/metre square.(for three coats)

Customer Reviews (0)