The New Cloverleaf 1 kw Pond Heaters are fully EU, TUV & UL approved they are available in two size 1kw & 2 kw.

The rule of thumb on average, 1kw of power is suitable per 1000 gals (4450ltrs) of pond water.

The Cloverleaf Heaters are very easy to install into new or existing pond setups and come complete with both rigid or flexible pipe connections. Choose from connection via 19mm, 25mm, 32mm or 38mm flexible pond hose using the 2 hosetails supplied or alternatively the units will accept 40mm rigid solvent weld or 1.5" rigid pressure pipe.

These simple easy to use pond heaters have a minimum flow rate of 4000lph and have a safety low flow shut off switch for peace of mind.

For maximum efficiency and to maintain an ambient temperature the pond should be covered and insulated to help achieve and maintain the pond temperature in cases of insufficient insulation more KW per gal/litre may be required depending on the level of desired water temperature.

These heaters are designed to be pump fed and will not work on a gravity return.