Pond Construction » Tank Connectors

Black Waste Threaded Tank Connectors

Have an Awkward job then these Threaded Tank Connectors will be ideal These have a 40 mm, 50 mm and 110 mm threaded male with a plain solvent weld socket on the other end, they can be used putting drain off valves in filters or return's in to Quarantine tanks. These

110 mm Threaded Tank connectors can be used for inlet/outlet ports between chambers

Note:

When you remove the nut off the 40 mm Tank connectors it then can be used to screw in to the TMC UV 30 watt or TMC 55 watt Uv, these Connectors can also be used to screw in to the Elecro Heaters or the Olympic Skimmer sockets

Tank Connectors (Flanged)

All our tank connectors are supplied with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.

Many inferior products use zinc plated screws and can have adverse effect under water, especially when salt or chemicals such as formalin and malachite green come into regular contact with such fixings.

The Radial Tank connector listed below is ideally suited for placement on the contoured surfaces such as a vortex, where the radial shaped design, contours snugly onto the outside surfaces leaving a close fit for final sealing of the 110 mm outlet port.

Grey Pressure Flanged Tank Connectors

We are now able to supply the new flanged tank connectors in Grey PVC pressure pipe. As with the black waste tank connectors these new PVC ones are also complete with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.

These Heavy duty Pvc Grey Pressure tank connectors are suitable for use with pond liners or in concrete / fibre glass ponds. For use with pond liners the Butyl or firestone pond liner is sandwiched between the flange and connector using a generous application of aquatic silicone sealer. For concrete and fibre-glass Koi ponds the top flange is discarded and just the body of the tank connector used, the fiberglass being run over the lip and into the mouth of the connector when the pond is glassed. These tank connectors can also be used as side outlets in the construction of pond filters to connect up to slide valves or ball valves.