Bonda Glassfibre Repair Kit
The Bonda Glass Fibre Repair Kit is normally used to repair permanently, holes, cracks, and splits in many materials. G.R.P, metal, wood, concrete and brick.
It will also bond to some plastics but not the oily types. P.V.C. polypropylene. Nylon - Note it will dissolve polystyrene (A.B.S).
Bonda Resin only requires the addition of an easy to mix liquid hardener to be ready to use with Bonda Glass Fibre Mat. When using glass fibre always fray out the edges of any joints so that the overlaps are strong and undetectable. Glass Fibre is whitish in the pack but when the resin impregnates the glass it becomes translucent making it easier to stipple into place.
When applying the resin always use a stippling action. When applying several layers ensure that all the air is driven out of the laminate by stippling vigorously. It is preferable to apply the resin and glass fibre 'wet on wet' although it will bond perfectly to a cured laminate.
It is always best to work with small pieces until experienced. |
